Misting Nozzles are used to cool outdoor spaces in all sorts of industries and for all kinds of purposes. They are used to ensure comfort of visitors in public venues and commercial establishments, and they are also used in industrial plants and for agriculture applications. One of the most important components of a cooling system is the misting nozzle. All misting systems are comprised of a series of nozzles placed in a line.

When attached to high-pressure pumps, water is forced through nozzles, forming droplets which evaporate into mist when they reach the outdoor air. This can reduce the temperatures by 35 to 40 degrees Fahrenheit. If the misting system is in a confined indoor area, it will provide a cool mist but will also increase humidity.

Orifice Diameter range starts from 0.4 mm to 2.00 mm. 

Misting nozzles are designed to create a spray that angles out anywhere from 40° – 100°, depending on your system’s water pressure. The wider the angle, the more area the spray will cover and the fewer nozzles will be needed. 18, 24 or 30 inch nozzle spacing is standard, but some suppliers will customize spacing to your needs. Nozzle spacing in plastic, nylon, and copper lines can be easily customized during installation, too.

How far in the air the spray “drifts” or spreads is determined by their height off the ground, the system’s water pressure and the size of the nozzle, plus the temperature of the water and the outside air.

Most of us realise that we feel a little cooler on a foggy day, but why is it that mist and fog cool us down? Flash evaporation is the answer.

Micron-sized droplets evaporate on contact and immediately cool people, animals or objects in an area.

This helps with theme park queues and large audiences.

Spray mist cooling systems have also been used to great effect in industrial settings where temperature reductions of up to 10 degree Celsius have been achieved.

Low pressure mist nozzle is designed to work in the pressure range of 3 to 12 bar pressure (45 PSI to 180 PSI).

Available in brass stainless steel and plastic materials for a wide range of applications.

Low-pressure mist nozzles are available in the orifice size of 0.2 mm to 2.0 mm

The size of the water droplets that make up the mist helps determine how much cooling effect you’ll be able to feel. As each little droplet evaporates, it cools the air immediately around it. Bigger droplets take longer to evaporate than smaller droplets. If they land on you before they’ve completely evaporated, you’re wet. If you’re in fairly dry air this can feel great as the water evaporates off of your skin. On the other hand, it can be uncomfortable in extremely humid weather, or if you just don’t want to be wet. Also any water that doesn’t evaporate must land on something. You’ll need to make sure it doesn’t puddle and that what it lands on is water-safe.

Misting nozzles function in cooling by atomizing pressurized water into aerosol particles that “flash-evaporate”. The smaller the water droplets, the better the cooling. the throw of mist nozzles can go up to 2 to 3 meters. The higher the pressure, fine mist is produced

High-Pressure Mist spray Nozzle with a wide range of orifice from 0.10mm, 0.15mm, 0.20 mm, 0.30 mm, 0.40 mm, 0.50 mm, 0.60 mm. Mist nozzle sprays at micron level particle size.

These cleanable Anti-Drip nozzles provide long-lasting performance for a variety of applications with corrosive and higher viscosity liquids. The most common uses include mid/high pressure misting systems, mosquito/insect control systems, odor control, and special effects.

Misting Nozzles are used to cool outdoor spaces in all sorts of industries and for all kinds of purposes. They are used to ensure comfort of visitors in public venues and commercial establishments, and they are also used in industrial plants and for agriculture applications. One of the most important components of a cooling system is the misting nozzle. All misting systems are comprised of a series of nozzles placed in a line.

When attached to high-pressure pumps, water is forced through nozzles, forming droplets that evaporate into mist when they reach the outdoor air. This can reduce the temperatures by 35 to 40 degrees Fahrenheit. If the misting system is in a confined indoor area, it will provide a cool mist but will also increase humidity.

This flow pattern is essentially a circular ring of liquid. Hollow cone nozzles are best for application requiring good atomization of liquids at lower pressures or where quick heat transfer is needed. These nozzles also feature large and unobstructed flow passage which provides relatively high resistance to clogging.

Liquid flow in tangential with respect to the pipe.

This anti-drip mist nozzle is best suitable for automatic hand sanitizer dispenser and tunnel disinfectant system. Be it a hand sanitizer or disinfectant liquids, our truemist spray nozzle dispense liquids as per standards.

When attached to high-pressure pumps, water is forced through nozzles, forming droplets which evaporate into mist when they reach the outdoor air. This can reduce the temperatures by 35 to 40 degrees Fahrenheit. If the misting system is in a confined indoor area, it will provide a cool mist but will also increase humidity.

Orifice Diameter range starts from 0.4 mm to 2.00 mm. 

Air nozzles are used for dispersing air or steam in a concentrated and straight jet. When using conventional air nozzles, the air is blown through a single hole and the turbulence affects the quality of spraying application, creates noise and wastage of air. Air nozzles reduce the turbulence and have a flat fan or solid stream respective round fan spray pattern. Producing compressed air is expensive, which means it’s important to use it in the best possible way. Our air nozzles optimize energy use and enable quiet and efficient blowing with compressed air.

Air Nozzles sold by us are easy to fit in tight space and engineered to efficiently use compressed air for optimal blow-off force. Air nozzles are commonly used for blowing with compressed air in the industry when e.g. cleaning, drying, Cooling, sorting, and transporting objects.

Chennai Precision industries – Jet Spray Nozzle sprays liquid uniformly. Powerful jet of fluids can be generated  It can be used in wide range of application including

• Car Wash
• Bike Wash
• Hydrojetting application
• Tank Cleaning

Bottle Washing Nozzle can effectively clean both the inner and outer surface of the Nozzle with less water efficiently and effectively

Full Cone Nozzle