INDUSTRIAL SPRAY NOZZLES INDIA
Water Mist Nozzle Low Pressure
Misting Nozzles are used to cool outdoor spaces in all sorts of industries and for all kinds of purposes. They are used to ensure comfort of visitors in public venues and commercial establishments, and they are also used in industrial plants and for agriculture applications. One of the most important components of a cooling system is the misting nozzle. All misting systems are comprised of a series of nozzles placed in a line.
When attached to high-pressure pumps, water is forced through nozzles, forming droplets that evaporate into mist when they reach the outdoor air. This can reduce the temperatures by 35 to 40 degrees Fahrenheit. If the misting system is in a confined indoor area, it will provide a cool mist but will also increase humidity.
Mist nozzle for outdoor cooling
Most of us realise that we feel a little cooler on a foggy day, but why is it that mist and fog cool us down? Flash evaporation is the answer.
Micron-sized droplets evaporate on contact and immediately cool people, animals or objects in an area.
This helps with theme park queues and large audiences.
Spray mist cooling systems have also been used to great effect in industrial settings where temperature reductions of up to 10 degree Celsius have been achieved.
Low Pressure Mist Nozzle
The size of the water droplets that make up the mist helps determine how much cooling effect you’ll be able to feel. As each little droplet evaporates, it cools the air immediately around it. Bigger droplets take longer to evaporate than smaller droplets. If they land on you before they’ve completely evaporated, you’re wet. If you’re in fairly dry air this can feel great as the water evaporates off of your skin. On the other hand, it can be uncomfortable in extremely humid weather, or if you just don’t want to be wet. Also any water that doesn’t evaporate must land on something. You’ll need to make sure it doesn’t puddle and that what it lands on is water-safe.
Hollow cone nozzle
This flow pattern is essentially a circular ring of liquid. Hollow cone nozzles are best for application requiring good atomization of liquids at lower pressures or where quick heat transfer is needed. These nozzles also feature large and unobstructed flow passage which provides relatively high resistance to clogging.
Liquid flow in tangential with respect to the pipe.
Sanitizer Mist spray Nozzle anti-drip Low Pressure
This anti-drip mist nozzle is best suitable for automatic hand sanitizer dispenser and tunnel disinfectant system. Be it a hand sanitizer or disinfectant liquids, our truemist spray nozzle dispense liquids as per standards.
When attached to high-pressure pumps, water is forced through nozzles, forming droplets which evaporate into mist when they reach the outdoor air. This can reduce the temperatures by 35 to 40 degrees Fahrenheit. If the misting system is in a confined indoor area, it will provide a cool mist but will also increase humidity.
Orifice Diameter range starts from 0.4 mm to 2.00 mm.
Wind Air Jet Nozzle
Air nozzles are used for dispersing air or steam in a concentrated and straight jet. When using conventional air nozzles, the air is blown through a single hole and the turbulence affects the quality of spraying application, creates noise and wastage of air. Air nozzles reduce the turbulence and have a flat fan or solid stream respective round fan spray pattern. Producing compressed air is expensive, which means it’s important to use it in the best possible way. Our air nozzles optimize energy use and enable quiet and efficient blowing with compressed air.
Air Nozzles sold by us are easy to fit in tight space and engineered to efficiently use compressed air for optimal blow-off force. Air nozzles are commonly used for blowing with compressed air in the industry when e.g. cleaning, drying, cooling, sorting, and transporting objects.
Fire Suppression Nozzle
Industrial Mist Nozzle
Orifice Diameter range starts from 0.3 mm to 2.00 mm.
Misting nozzles are designed to create a spray that angles out anywhere from 40° – 100°, depending on your system’s water pressure. The wider the angle, the more area the spray will cover and the fewer nozzles will be needed. 18, 24 or 30 inch nozzle spacing is standard, but some suppliers will customize spacing to your needs. Nozzle spacing in plastic, nylon, and copper lines can be easily customized during installation, too.
How far in the air the spray “drifts” or spreads is determined by their height off the ground, the system’s water pressure and the size of the nozzle, plus the temperature of the water and the outside air.
For maximum cooling effect, it makes sense that you would want a fairly dense curtain of mist. But there is a point at which the system simply cannot make you any cooler, no matter how closely the nozzles are spaced. The final determination of how closely to space the misting nozzles in your system will be based on, well, your system.
Jet Spray Nozzle
Synergy Spray – Jet Spray Nozzle sprays liquid uniformly. Powerful jet of fluids can be generated It can be used in wide range of application including
- Car Wash
- Bike Wash
Bottle Washing Nozzle
Bottle Washing Nozzle can effectively clean both the inner and outer surface of the Nozzle with less water efficiently and effectively
Full Cone Spray Nozzle
Full Cone Nozzle
|Thread Variations||1/4 Inch, 1/2 Inch, 3/4 Inch|